WELCOME TO OUR NEW AND UPDATED BLOG. OUR PROVIDER DISAPPEARED OUR OLD ONE SO WE'RE REPRINTING SOME OLDER BLOGS TO GET STARTED.
10 REASONS WHY BUSINESS TELECOM INSTALLATIONS FAIL
FACILITIES ISSUES:
Every voice and data circuit requires an available facility (actual physical line conditioned for the service) in order to deliver services. If all the existing facilities in the customer's local CO are in use, the phone company may need to install additional lines in order to complete the installation. This can cause long delays and additional expense. Carriers want to replace copper with fiber because copper is expensive to maintain, requires equipment that must also be maintained and is less efficient than fiber. Therefore carriers aren't looking to invest in new copper build-outs creating a shortage. Whenever the installation milestone says: "facilities issues" it can mean almost anything. Worst case: Construction build-out may be required or permits needed.
LINES NOT TAGGED OR MIS-TAGGED BY THE LEC
There can be hundreds of lines in a phone closet. If a phone company tech activates a group of lines but doesn’t “tag” or identify them properly, it's extremely difficult for your vendor to locate them to complete the installation. Getting a phone company technician back out to the site is difficult and adds time to the installation process. This could delay your order for hours or days and adds unnecessary expense. The customer still has to pay their phone vendor to wait for the phone company tech to come back and identify the lines they installed earlier.
LOCAL LOOP INSTALLATION FAILS
Even if competitive Local Exchange Carrier is providing the service, the local phone company (LEC) installs the local loop. An order cannot be completed until the local loop is completed, tested and accepted. Customers often turn away the LEC thinking that there has been a mistake. Rescheduling this is necessary and causes a time consuming and costly delay.
PORTING ISSUES
Incumbent carrier rejects port-numbers request - or ports wrong numbers - or ports early:
Rejecting a port request is often is an underhanded attempt by the telecom company losing the business to sabotage an order. They can reject a phone number porting request for many reasons such as;
* Your business name is slightly different than what appears on their bill,
* All the phone numbers aren’t accounted for or a myriad of other minor details.
Typically, each time a porting request is rejected, the order is delayed 10 business days and causes the customer to reschedule their phone and IT vendors. If this continues for too long, customers tend to have a knee jerk reaction and cancel the whole deal out of sheer frustration - thereby shooting themselves in the foot.
If numbers are accidentally ported early, the customer can be left with no services until the issue is resolved.
PIC CODE ISN'T ADDED TO LINE OR MULTIPLE LINES
Every phone line is assigned a Primary Interlata Carrier (PIC) code. Without PIC Code, long distance calls on the line will be subject to Casual Billing which is a much more expensive rate. It's not uncommon to miss a few lines on an account with many lines. This usually happens during the switchover from one carrier to another.
TECH DOESN'T SHOW UP OR ARRIVES EARLY OR LATE
If the customer outsources phone and IT work to vendors, the vendors are required to be on site for the installation. If the phone company tech is late, the customer may have to pay their vendors to wait. If the phone company tech is early, there won’t be a handoff and their vendors will have issues completing their work. Unfortunately everyone is at the mercy of the LEC first to deliver the local loop in a timely fashion. But stuff happens, especially in big cities. Things can get really out of hand if there is a storm, a visit by the President, a flood, transit strike ....whatever. Local events and weather do affect the telcos ability to maintain their already overburdened schedules.
WRONG SERVICE IS INSTALLED
Example: Customer's phone system may require analog phone lines but digital lines were ordered. Or, a VPN between two locations requires a specific router configuration which wasn't communicated. These are design issues and can be tracked by a competent project manager. If these details aren’t properly monitored and coordinated the installation will be delayed and corrections will need to be made. Worse, your services won’t function properly until the necessary adjustments are made, requiring additional expense for customer's phone and/or IT vendors.
DEFECTIVE EQUIPMENT (Router or switch):
Occasionally, new services don’t work properly or customers experience repeated outages with new services. It's natural to assume that it’s the quality of the new carrier. Typically, after initiating a trouble ticket triggering additional testing, a technician will figure out that a router or other equipment isn't performing properly or mis-configured. Easy - but inconvenient.
RISER CABLES NOT AVAILABLE:
In a high rise, telecom services are usually delivered in the basemen to a telco room. The lines rise vertically in the building via a wire riser or elevator shaft. They then are delivered to another phone closet on the customer’s floor.
Total of 4 connections are required:
* connection to the primary phone closet
* connection to the riser cable
* connection to the local phone closet
* connection to business suite.
Every element of the installation must be completed and all the parties work coordinated or the service won’t be available at the time of installation
AFTER-HOURS ONLY, OR NO ACCESS TO PHONE CLOSET
Either the phone closet is locked and property management unavailable to provide access. Sometimes the phone closet is located in an inconvenient location. There are many reasons why access to the phone closet may be restricted. It may be in another tenant’s suite. An installation may have to be scheduled after business hours requiring the customer to arrange for their phone and IT vendors and employee to be present.
